Product Description - Oase LIVING WATER FiltoSmart 60 Instrucciones De Uso

• To avoid the possibility of the appliance plug
getting wet prevent water from dripping onto plug.
A "drip loop," shown in the figure below, should
be arranged by the user for each cord connecting
an aquarium appliance to a receptacle. The "drip
loop" is that part of the cord below the level of the
receptacle, or the connector if an extension cord
is used, to prevent water traveling along the cord
and coming in contact with the receptacle.
SAVE THESE
INSTRUCTIONS!
S y m b o l s u s e d i n t h e s e i n s t r u c t i o n s
C A U T I O N
 Indicates a possibly hazardous situation.
 Non‐observance may lead to slight or minor inju‐
ries.
N O T E
Indicates information intended to give the user a bet‐
ter understanding.
Additional information
 A Reference to a figure, e.g. Fig. A.
→
Reference to another section.
PRODUCT DESCRIPTION
Scope of delivery
 A FiltoSmart 60
1 Operating manual for FiltoSmart 60
2 Unit head
3 Blind plug
4 Hose connector, inlet (IN)
5 Container, filled with filter medium
6 Slide closure
7 Hose connector, outlet
8 Bag with 4 feet
9 Ceramic substrate
(120 g bag)
10 Hose
11 Flow‐out pipe
12 Suction pipe
 B Connection set
1 Suction cup
2 Terminal
3 Hose adapter
4 Angle piece
5 Union nut
6 Suction basket
7 Water distributor
8 Cover cap
Intended use
FiltoSmart 60, referred to in the following as
"unit", may only be used as specified in the following:
• Water filtering and recirculation
• For operation with freshwater or saltwater.
• Operation under observance of the technical data.
The following restrictions apply to the unit:
• Only use indoors and for aquaristic purposes in the
home (not for commercial use).
• Only operate with water at a water temperature of
+39 °F to +95 °F.
‐ EN ‐
Quantity
1
1
1
1
1
1
1
2
1
1
1
Quantity
5
5
2
1
4
1
1
1
9