USING THE KNIFE SHARPENER
1. The slot in the Knife Sharpener is slanted for left or right handed use.
2. For best results, sharpen the entire blade length in one continuous stroke careful-
ly pulling the blade through the slot and slightly up towards you.(D) Repeat until
you achieve desired sharpness. Wash and dry knives after sharpening. Use cau-
tion with blade after sharpening.
D
SERVICE OR REPAIR
Service, if necessary, must be performed by a Black & Decker Household Appliance
Company-Owned or Authorized Service Center. The Service Center nearest you can
usually be found in the yellow pages of your phone book under "Appliances-Small-
Repairing," on the enclosed Service Center Insert or by calling the appropriate toll-free
"800" number on the cover of this book.
If mailing or shipping your Can Opener, pack it carefully in a sturdy carton with enough
packing material to prevent damage. Include a note describing the problem to our
Service Center and be sure to give your return address. We also suggest that you insure
the package for your protection.
FULL TWO-YEAR WARRANTY
Black & Decker warrants this product against any defects that are due to faulty material
or workmanship for a two-year period after the original date of consumer purchase or
receipt as a gift. This warranty does not include damage to the product resulting from
accident or misuse. If the product should become defective within the warranty period,
we will repair it or elect to replace it free of charge. We will return your product, trans-
portation charges prepaid, provided it is delivered prepaid to any Black & Decker
Household Appliance Company-Owned or Authorized Service Center.
This warranty gives you specific legal rights and you may also have other rights which
vary from state to state or province to province. Answers to any questions regarding
warranty or service locations may be obtained by calling Consumer Assistance and
Information toll free, in the U.S.: 1-800-231-9786; in Canada: 1-800-465-6070.
Cover
(Selected Models Only)
CLEANING YOUR CAN OPENER
1. Before cleaning any part of the Can Opener, unplug
the cord.
2. To remove the Blade Assembly for easy cleaning, lift
the Lever up and pull the Blade Assembly out (see A).
The Assembly can be washed by hand in hot, sudsy
water, rinsed or wiped with a sponge and dried thor-
oughly. It is NOT dishwasher-safe. Reverse the
procedure to replace the Blade Assembly.
3. Before replacing the Blade Assembly, wipe the Can
Opener body, and area around the drive wheel with a
slightly damp cloth or sponge.
4