Product Overview - Tripp-Lite B126-1A1-PLHD Manual De Propietario

Product Overview

Transmitter and Receiver Front Panel
A
Power LED (Blue)—Illuminates to indicate the unit is receiving power.
B
Data Transmission LED (Yellow)—Blinks slowly while connection is building.
Blinks quickly when unit is successfully connected and transmitting data.
C
Connection LED (Green)—Blinks when signal is connected.
D
Reset Button—Press to restart the unit.
Transmitter Back Panel
E
C8 AC Power Input—Connects to included 4 ft. C7 to NEMA 1-15P power cord.
F
IR-OUT Connector (Female)—Connects to included IR-OUT cable. IR blaster
cable should be placed close to source device for best results.
G
HDMI Output Connector (Female)—Connects to local HDMI display with HDMI
cable (sold separately).
H
HDMI Input Connector (Female)—Connects to HDMI source with HDMI cable
(sold separately).
Receiver Back Panel
I
C8 AC Power Input—Connects to included 4 ft. C7 to NEMA 1-15P power cord.
J
IR-IN Connector (Female)—Connects to included IR-IN cable. Source remote
control must be within the required range of the IR receiver.
K
HDMI Output Connector (Female)—Connects to local HDMI display with HDMI
cable (sold separately).
18-02-433-933756.indb 3
A B C
E F
I J
3
D
G H
K
4/11/2018 8:06:22 AM