FITFIU FITNESS BELI-90 Manual Usuario página 42

STEP 2:
1. Insert the hinge pin (12A) through the hinge pin of the right (4) and left (5) handlebars and the main frame.
Then place the D-shaped washer (49) and spring washer (52) on both sides and tighten the hinge bolt (57).
NOTE: The hinge pin is different for the right (4) and left (5) handlebars. The hinge bar is on the
correct side when the welded horizontal tube faces the rear of the machine.
2. Insert a pedal pin (12BR and 12BL) through the pedal tube for the right side (6R) and for the left side (6L).
Attach the pedal bolt to the crankshaft (27), which is already installed inside the main frame, use petroleum
jelly to reduce friction when necessary. Secure the pedal bolt, on the inside of the crankshaft, with a 1/2"
spring washer (51) a 1/2" nut (48R and 48L) and a cap (65).
3. Tighten the covers (66) with the nuts (46) and bolts (56) at the front of the pedal tubes (6L and 6R).
STEP 3:
1. Fix the pedal (11) to the pedal tube (6L and 6R). Use four M10X45 screws (44) and four M10 nuts (45) .
42