Ce Declaration Of Conformity - Sebson GS546 Manual De Instalación

If not disposed of properly, the substances contained in the batteries can cause health and environmental hazards.
These dangers are averted by the separate collection and proper disposal of used batteries.
Cleaning:
Clean the housing regularly from dirt, dust or cobwebs! Use a vacuum cleaner with a soft suction brush or a soft
cleaning cloth. In order for the unit to function properly, the housing, especially the air slots, should always be free of
dirt! In order not to damage the product, it is essential to avoid water penetrating into the housing! Never clean the
device under running water! Do not use solvent-containing cleaner for cleaning. Do not use solvent-containing cleaner
for cleaning!

CE Declaration of Conformity:

This product has been prepared according to the listed below guidelines:
 EMC 2014/30/EU
 RoHS 2011/65/EU
The declaration of performance for this product can be found under the following link:
www.sebson.de/DOP_GS546_EN.pdf
Essential characteristics:
Nominal activation conditions/
Sensitivity. Response delay
(response time) and
Performance under fire
conditions:
Operational reliability:
Tolerance to supply voltage:
Durability of operational
reliability and response delay;
temperature resistance:
Durability of operational
reliability; vibration resistance:
Durability of operational
reliability; humidity resistance:
Durability of operational
reliability; corrosion resistance:
Durability of operational
reliability; electrical stability:
Siterwell Electronics Co., Limited
No.666 Qingfeng Road, Jiangbei District,
Ningbo, Zhejiang Province, 315034 China
Perfomance: Harmonised technical
specification:
PASS
PASS
PASS
EN 14604:2005/AC:2008
PASS
PASS
PASS
PASS
PASS
17