ADJUSTING THE CHRONOGRAPH HANDS TO ZERO
Pull crown out to position III.
1
(All two chronograph hands are in
their correct or incorrect zero position.)
2
Keep push-buttons
A
and
B
depressed
simultaneously for at least 2 seconds.
(The center stop-second rotates by 360°
- corrective mode is activated.)
3
Press push-button
A
to single step the
center stop-second hand. Press and
hold push-button
A
to advance the center
stop-second hand quickly.
3b
Press
push-button
B
to advance to the next hand.
4
Press push-button
A
to single step the
minute counter hand. Press and
hold push-button
A
to advance the
minute counter hand quickly.
Return the crown to position I.
5
BASIC FUNCTION (START / STOP / RESET)
Example
1
Start: press push-button A.
2
Stop: to stop the timing, press push-button
once more and read the two chronograph
counters: 20min / 10sec.
Zero positioning: Press push-button B.
3
(The two chronograph hands will
be reset to their zero positions.)
All manuals and user guides at all-guides.com
2
A
I
II
III
B
2
A
A
B
8
ACCUMULATED TIMING
Example
4
1
Start: start timing
3
2
Stop: e.g., 15 min. 5 sec. following
1
3
Restart: timing is resumed
4
*Stop: e.g., 13 min. 5 sec. following
The accumulated time = 28 min. 10 sec.
5
5
Reset: the three chronograph hands
are returned to their zero positions.
3b
Please note:
* Following
continued by pressing push-button
INTERMEDIATE OR INTERVAL TIMING
Example
Start: start timing.
1
2
Display interval:
e.g., 10 min. 10 sec. following
Timing continues in the background.
*
3
Making up the measured time:
2
the two chronograph hands are quickly
1
advanced to the ongoing measured time.
4
Stop: e.g., 28 min. 10 sec. following
5
Reset: the three chronograph hands
are returned to their zero positions.
Please note:
* Following
displayed by pressing
3
1
.
3
.
4
, the accumulation of the timing can be
A
(Restart/Stop, Restart/Stop,...)
1
.
1
.
3
, further intervals or intermediates can be
B
(display interval / make up measured time, ...)
9
4
3
2
1
A
B
5
4
1
A
B
2
3
5