Time Mode - NIXON THE UNIT DIVE Manual De Operaciones

1

TIME MODE

Press PUSHER B to advance through the modes in the
following sequence:
HOME SCREEN: TIME, ALARM, TIMER, CHRONOGRAPH,
DIVE LOG
TIME MODE FEATURES
-hours, minutes and seconds display in 12 or 24 hour format
-day, date and month display
-dual time zones, TIME ZONE 1 and TIME ZONE 2
To set the primary time zone (T1) on your watch:
-Press PUSHER B (MODE) until you are in Time Mode
-Press and hold PUSHER B to enter Time Mode setting state
(minutes will begin to blink)
-Press PUSHER C to increment the value
-Press and hold PUSHER C to quickly increment the value
-Press PUSHER D to decrement the value
-Press and hold PUSHER D to quickly decrement the value
-Press PUSHER B to advance through minute, hour, second,
year, month, date, 12/24hr, and auto-off : hours of inactivity
after which watch will turn off
-Press PUSHER A to confirm and exit setting state
To toggle between TIME ZONE 1 and TIME ZONE 2, press
PUSHER D. To switch from one to the other, press and hold
PUSHER D. Time Mode setting state will only affect current
time zone. To set your other time zone, switch to the desired
zone, and press and hold PUSHER B to enter Time Mode
setting state. Then follow the instructions as listed above.
-In Time Mode, press PUSHER C to toggle hourly / button
chime on or off
-Press PUSHER B to advance to ALARM MODE
8 9