ION Block Rocker Flash Guia De Inicio Rapido página 6

Radio Selector: This button sets the radio to FM1, FM2, or AM, or turns the radio off.
7.
AM/FM Presets: Store a favorite radio station and quickly tune to a preset radio station.
8.
There are 6 numeric positions to store AM band presets and 12 numeric positions to store
FM band presets (6 numeric positions for FM1 and 6 numeric positions for FM2). To add a
preset:
i. Select either the FM1, FM2, or AM band and then use the Radio buttons to select the
desired radio station.
ii. Press and hold a numeric preset button to assign the current station to that preset
number. The display will show "SAVE" to show the station has been saved. To use an
added preset, tap a preset number once lightly to go to the stored radio station.
9. Play/Pause: Press to play or pause a track from a connected Bluetooth device.
Tune/Track Buttons: Tap these buttons to tune in a radio station or go to the
10.
previous/next track on a Bluetooth- connected device. To "seek" (jump to the next
available station), hold either button down for a few seconds until it starts to seek a station.
The unit will remember the last station it was on and start at that station when powered off
and on again.
Master Volume Control: This adjusts the speaker's main mix volume, which includes the
11.
Microphone Input, Auxiliary Input, Radio, and the audio of a paired Bluetooth device.
USB Charging Port: Connect your device's charge cable here to charge it. USB charging
12.
only functions when the unit's power is turned on.
Note: To charge smartphones and tablets faster, put the device's screen to sleep.
Antenna: Adjust this FM antenna to get the best radio reception. Fold this down when not
13.
using the radio and when moving the unit.
NFC (near-field communication): Touch and briefly hold your supported and enabled
14.
device to the NFC logo to pair the device.
Rear Panel
1. Power On/Off Switch: Turns Block Rocker Flash on or
off.
2. Power Cable Input (IEC): Insert the included power cable
here to power the unit.
3. Fuse: If the unit's fuse is broken, lift this tab to replace the
fuse. Replace it with a fuse with an appropriate rating.
Using a fuse with an incorrect rating can damage the unit
and/or fuse.
6
3
ON
OFF
1
2