emergency battery backup box
Store the battery box in a convenient location for emergency use.
(4) 9 Volt batteries are required to operate the power down feature and are NOT included.
OVERVIEW
For emergency use only, in case of a power outage.
In the event that the base is stuck in an articulated position during a power outage, the battery
backup box will return the base to a flat position. Batteries are not to be used for normal operation
of the base.
Remove the battery box after the emergency is over, as the system will continue to draw power
from the batteries, even if not in use.
STEP 1
Install the 9 volt batteries into the provided battery pack.
Do not mix brand name batteries.
STEP 2
Connect battery pack to input power cord attached to control box.
Battery
Backup Box
Input
Power Cord
If the base is in the upright position use the remote to return to a
flat position.
Control Box
13