Resumen de contenidos para Ergomotion Contour Elite Gold
Página 1
OWNER’S MANUAL Contour Elite Gold Actual product appearance and functionality may vary from photographs, illustrations and descriptions included in this manual.
safety precautions and usage statements Attention: Important Safety Disclaimers Read all instructions before using your adjustable base. Save these instructions. WARNING outlet. Unauthorized modification or failure to use a wall outlet or surge protector could void the electrical portion of your warranty. WARNING Always unplug the base from the electrical outlet before servicing any part of the base.
Página 4
IN-HOME USE AND HOSPITAL STANDARDS: Ergomotion adjustable bed bases are designed solely for in-home use. This MASSAGE OPERATION AND LOCATION ENVIRONMENT base was not designed as a hospital bed and is not designed to meet hospital The massage feature will emit a tone during operation.
Página 5
The angle (designated “a” in figure 1) between the back section and the flat PAIRED OPERATION: All Ergomotion adjustable foundations, depending on make and model, are designed and manufactured to perform and function within designated quality control parameters. Bases are subject to meticulous and rigorous inspections during section for various configurations of the mattress support platform shall be ±...
safety precautions and usage statements restarting. • Tinker with or modify base. This will void the warranty. WEIGHT LIMITS: • Press down on the head or foot while actuated can damage frame and This product is not rated to support weights exceeding 850 pounds. This product motors.
parts list Before discarding the packing materials, ensure all the parts are accounted for. All electronics and components that need to be installed are located in boxes under the base or attached to the frame. (Remote varies based on model.) A)A) Wireless Remote Control and (3) AAA Batteries Mattress Retainer Bar *...
base overview USB Ports Foot Motor Head Massage Foot Massage Motor Motor USB Ports Power Down Control Box Head Motor...
Página 9
quick reference guide Not to scale. For illustration purposes only. Read all instructions before beginning installation. CONTROL BOX OVERVIEW ELECTRONICS OVERVIEW Power Cord Massage Motor Ports Control Box Pairing Power Supply Multifunction Port Input Power Power LED Reset Cord Port Button To remove control box, release metal clip and unplug cords.
Ensure tighten. that the Power Supply and all attached cords are directed toward the desired surge protector. The 3-in-1 legs untwist into separate sections for custom leg height options. For customer support, visit www.ergomotion.com or call: 1-888-550-3746...
Página 11
Setup is now complete! Test all functions on remote. STEP 9 Quickly test remote functions to verify proper setup before placing mattress on base. Return the base to a flat position before placing the mattress on top. For customer support, visit www.ergomotion.com or call: 1-888-550-3746...
remote control Remote Control arrives paired to the adjustable base. Three (3) AAA batteries are required to operate the remote. MASSAGE FEATURE The HEAD button will turn on the head massage. Cycle through 3 massage intensities. The FOOT button will turn on the foot massage.
Página 13
remote control ADJUST ONE TOUCH BUTTONS One touch ZERO-G preset The HEADarrows lift and position. Zero-G adjusts your lower the head section of the legs to a higher level than base. ZERO your heart helping to relieve pressure off the lower back and promote circulation.
remote control - preset programming The programmable feature allows you to save custom positions. Please read all the instructions below before setting your custom presets on the remote. STEP 1 Articulate the head and foot to your desired position. STEP 2 Press and hold one of the preset buttons [I and II] for 7 seconds.
Test all remote functions. If the remote buttons do not impact the Locate the Power Down Box and adjustable base movements, please repeat the process again or press the button TWICE. A light call Ergomotion customer service: U.S. 1-888-550-3746 on the Battery Back Up Box will illuminate. POWER DOWN...
syncing two bases (optional) A Sync Cord is included with the base. Not available on Queen, Full or Full-Long size bases. The Sync Cord connects the two control boxes to a single remote for the synchronization of two bases. STEP 1 The system is now linked.
power down box Store the battery box in a convenient location for emergency use. Two (2) 9 Volt batteries are required to operate the power down feature and are NOT included. OVERVIEW For emergency use only, in case of a power outage. In the event that the base is stuck in an articulated position during a power outage, the Power Down Box will return the base to a FLAT position.
connecting strap (optional) Connecting straps are secured to the base frame upon delivery. Legs are required for the installation of the connecting straps. STEP 1 STEP 2 With the bases in their desired location, slightly loosen both legs Slide side (a) of the connecting strap onto leg bolt. Swing the to allow the strap to fit on the leg bolt, between the leg washer strap and connect side (b) to the leg bolt.
headboard bracket installation guide (optional) Headboard Brackets are optional accessories and are not included. A 9/16” (14 mm) & 1/2” (13 mm) socket or wrench and legs are necessary to complete installation. STEP 1 STEP 2 Attach the plastic spacer and T-Bracket. a.) Align the hole in the bracket to the brass sleeve into which the leg threads.
Remove and replace full batteries in the remote control and re-pair the remote to the base (see page 13). If issue is not resolved by following the instructions above, locate serial number on warranty card or back of remote and call Ergomotion Customer Service: (888) 550-3746...
USO EN EL HOGAR Y NORMAS DE HOSPITAL: PARA REDUCIR EL RIESGO DE DESCARGA, QUEMADURAS, INCENDIO O LESIONES: Las bases ajustables de Ergomotion están diseñadas exclusivamente para el uso en el Para una óptima seguridad y operación, conecte el enchufe de la cama ajustable a un hogar.
Página 22
Para la limpieza de manchas, limpie el área con una esponja ligeramente húmeda o Todas las bases ajustables Ergomotion, dependiendo de la marca y el modelo, están aspiradora con un accesorio de cepillo suave para eliminar las partículas. Mantenga a un diseñados y fabricados para realizar y funcionar dentro de los parámetros de control...
Página 23
español descanse 30 minutos después de que el masaje se haya apagado automáticamente antes Cumplimiento con la FCC: Este dispositivo cumple con la Parte 15 de las Regulaciones de de reiniciar. la Comisión Federal de Comunicaciones (FCC, en inglés). Su funcionamiento está sujeto a las dos condiciones siguientes: 1) Este dispositivo no puede causar ninguna interferencia LÍMITES DE PESO: perjudicial y 2) Este dispositivo deberá...
Página 24
Pg. 7 - Guía de referencia rápida: No llevar a escala. Este diagrama sólo tiene el fin de ilustrar. con el lado curvado hacia arriba. Lea las instrucciones antes de comenzar la instalación. Para servicio al cliente, visite www.ergomotion.com o llame al 1-888-550-3746. Control Box = Caja de control Power Cord = Cable de electricidad Pg.
Página 25
La luz LED de pareo de la caja de control comenzará a parpadear. comprar piernas, comuníquese con el Servicio de Atención al Cliente de Ergomotion Presione y sostenga el botón que está detrás del remoto, el cual comenzará a parpadear.
Página 26
Si el problema no se resuelve, siguiendo las instrucciones anteriores, busque el número Soporte en T (2) de serie en la tarjeta de garantía, manual o posterior del mando a distancia y llame Separadores (2) Ergomotion Servicio al cliente: EE.UU. 1-888-550-3746 Tornillos largos (8) Tornillos cortos (10) Tuercas (18) Para completar la instalación es necesario tener un socket y una llave inglesa de 9/16”...