Switch Test - NAMCO GUN SURVIVOR 2 Manual Del Operador

6-2-4-3 Switch Test

1. Select "SWITCH TEST" on the I/O TEST menu screen. The following
screen is displayed.
COIN
SERVICE
TEST
SELECT (UP/DOWN)
ENTER
TRIGGER
GUN BUTTON
EXIT : UP SELECT SW + ENTER SW
Each time a switch is operated the corresponding display will change from OFF
to ON
The numbers next to Pitch, Roll, and Yaw will change as the gun is turned,
moved left/right and backwards/forwards. When the values reach maximum,
(Pitch 0128, Roll -0128 and Yaw 0128), the colour of the value will change to
green and OK will appear.
2. Press both the Up Select switch and the Enter switch together to return to
the I/O Test Menu screen
I / O TEST
LINK : ON 1
PITCH 0128 OK
ROLL -0128 OK
YAW 0000
Page 48
OFF
OFF
ON
OFF
OFF
OFF
OFF