Switch Test - NAMCO TIME CRISIS 4 DX Manual Del Operador

6-2-3-3

Switch Test

This screen is used to test the game switches.
1. Select 'SWITCH TEST' on the I/O TEST Menu screen, and press the Enter button.
The following screen will be displayed.
DIP
LINK
LINK AS
SWITCH TEST
UP SELECT SW + ENTER SW:EXIT
2. When a switch is pressed, the corresponding display on the screen will change.
(a) The displayed number will increment each time sufficient coins for a credit are
inserted through the Cashflow.
(b) Changes to ON each time the Service button is pressed.
(c) This will always display ON as the game is in test.
(d) Changes to ON each time the Select switch is pushed Up.
(e) Changes to ON each time the Select switch is pushed Down.
(f) Changes to ON each time the Enter button is pressed.
(g) Changes to ON each time the Gun Trigger is pulled.
(h) Changes to ON each time the Pedal is depressed.
(i) Changes to ON each time the Gun Assy is aimed at the screen.
3. When testing is complete, press the Enter button while holding the Select switch UP
to return to the I/O Test Menu screen.
I/O TEST
:1234 [ON:RED]
:ON
: 1 (LEFT)
COIN
SERVICE
TEST
UP SELECT
DOWN SELECT
ENTER
GUN TRIGGER
FOOT PEDAL
SENSOR
SWITCH TEST screen
0
OFF
ON
OFF
OFF
OFF
OFF
OFF
OFF
(a)
(b)
(c)
(d)
(e)
(f)
(g)
(h)
(i)
61