ASROCK Z97 Extreme6 Manual Del Usuario página 28

Power LED Header
(3-pin PLED1)
(see p.1, No. 18)
Serial ATA3 Connectors
(SATA3_0_3:
see p.1, No. 12)
(SATA3_1_4:
see p.1, No. 13)
(SATA3_2_5:
see p.1, No. 14)
(SATA3_A1_A2:
see p.1, No. 11)
(SATA3_A3_A4:
see p.1, No. 10)
Serial ATA Express
Connector
(SATAE_1:
see p.1, No. 15)
26
Please connect the chassis
1
power LED to this header
PLED-
PLED+
PLED+
to indicate the system's
power status.
These ten SATA3
connectors support SATA
data cables for internal
storage devices with up
to 6.0 Gb/s data transfer
rate. If the eSATA port
on the rear I/O has been
connected, the internal
SATA3_A4 will not
function. The SATA3_4,
SATA3_5 are shared
with the SATA Express
connector.
To minimize the boot
time, use Intel® Z97 SATA
ports (SATA3_0) for your
bootable devices.
Please connect either
SATA or PCIe storage
devices to this connector.
The SATA Express
connector is shared with
the SATA3_4, SATA3_5
and the M.2_SSD (NGFF)
Socket 3 (M2_2).
*The SATA Express
interface is a combination
of SATAE_1, SATA3_4,
and SATA3_5.