Kohler 7160 Instrucciones De Instalación página 5

If sufficient clearance cannot be obtained by adjusting the
stopper, remove the lift rod assembly. Loosen the screw,
and slide the adjusting block up on the adjusting rail to
increase the clearance, or down to decrease the
clearance. Tighten the screw, and insert the lift rod
assembly back into the overflow ell.
CALL US FOR HELP
Here's what you need to do if you require service:
First review the installation instructions to ensure correct installation. For additional assistance in the USA, call our
Customer Service Department for direct help. You may also contact us at our web site listed below.
Kohler Co.
Call 1-800-4-KOHLER within the U.S.
Call 001-877-680-1310 within Mexico
Call 1-800-964-5590 within Canada
www.kohler.com
5
Adjusting Block
Adjusting Rail
Fig. #13
Lift Rod
Assembly
Screw
A
1010455-2-