Top Panel - Akiyama CDX-MP250S Manual De Usuario

TOP PANEL

1. TRACK KNOB. Several functions are available
Normal Track serch: Turn the knob to browse the track by +1 /-1 steps.
Fast track search: keep the knob pressed while turning to browse the tracks by +10/-
10 steps.
Track Mode: Pressing the knob shortly you will be able to browse all the tracks on
your CD as if no subfolders were present.
2. SEARCH BUTTONS.
This search button allows you to quickly scan backwards through a track.
This search button allows you to quickly scan forwards through a track.
3. IN BUTTON. This function allows you to set a CUE POINT without music
interruption. This button also sets the starting point of a seamless loop.
4. OUT BUTTON. This button is used to set the ending point of a loop. A loop starting
point is set by pressing the IN BUTTON. Pressing the OUT BUTTON set the loop
ending point. The loop will continue to play until the OUT BUTTON is pressed once
again.
5. RELOOP BUTTON. If a SEAMLESS LOOP has been made, but the Player is not
actively in SEAMLESS LOOP mode (a loop is not playing), pressing the RELOOP
BUTTON will instantly reactivate the SEAMLESS LOOP mode. To exit loop, press
the OUT BUTTON. The indicator of LOOP light and RELOOP flash in the LCD
DISPLAY when the RELOOP function is on.
Loop edit: when a loop is programmed, press RELOOP button for about 2 seconds to
enter "loop edit" mode. Now you are able to change the endpoint of the loop. see
chapter "general functions overview" for more information.
6. CUE BUTTON. Pressing the CUE button during playback immediately pauses
playback and returns the track to the last set cue point. In pause mode and the CD is at
the cue point, press the CUE button to provide cue monitor. The CUE LED will lit
when the CD is at the cue point.
7. PLAY/PAUSE BUTTON. Each press of the button to change from play to pause or
from pause to play.
8. OPEN/CLOSE BUTTON. Press this button to open and close the disc tray. This
button is disabled during playback. NOTE: If the tray will not open when the disc is
playing, first press the PLAY/PAUSE button.
9. DISC TRAY. Use the OPEN/CLOSE button to open disc tray and put the CD in
place. If the tray is not closed after 60 sec, it will close automatically to prevent
damage.
10. PITCH BEND BUTTONS. The speed rises while the "+button" is pressed and
returns to the original pitch when the button is released. The speed drops when the
" button" is pressed and returns to the original pitch when the button is released. -
These buttons can be used to synchronize the beats of 2 tracks.
11
All manuals and user guides at all-guides.com
CONTROLS AND FUCTIONS
11. PITCH SLIDER. This slider is used to adjust the playback pitch percentage when the
PITCH function is activated. The slider is a set adjustment and will remain set until
the pitch slider is moved or the PITCH function has been turned off. The amount of
pitch being applied will be displayed in the LCD. Use this slider to match the BPM's
of this unit to that of another music source. By changing the pitch of one disc with
respect to the other in this way, the beats can be matched.