Akiyama CDX-MP250S Manual De Usuario página 14

4
1
2
3
5
6
7
8
9
10
1. A.CUE indicator. This will indicate if the Auto Cue is on or off. Press and hold the
SGL/CTN for 1 sec. to turn theAuto Cue function on and off.
2. A.BPM indicator. This will indicate that theAUTO BPM counter is active.
3. SINGLE indicator. This indicates that the CD drive is in single play mode; the track
will play once and return to CUE mode. If the single indicator is not on the unit is in
continuous mode. In continuous mode the drive will play all the remaining tracks on
the disc.
4. LOCK indicator. This will indicate when KEY LOCK is active.
5. PITCH VALUE. This meter will display the pitch percentage applied by the PITCH
SLIDER
6. CD/MP3 indicator. Indicates whether the current disc is a standard audio disc or an
MP3 disc.
7. FOLDER/TRACK indicator. This will indicate that you are looking at the track
number or the folder number.
8. FOLDER/TRACK meter. The meter indicates which track or folder is currently
cued or is playing.
9. ELAPSED/ TOTAL/ REMAIN indicator. Indicates whether the time mode shown
on the display refers to total remaining time or track remaining time. If either of
these is not illuminated, this indicates elapsed track time.
13
All manuals and user guides at all-guides.com
20 21 17
18
19
16
15
14
13
12
11
LCD DISPLAY
10.CHARACTER DISPLAY. The text portion of the display (the bottom row) is
mainly used to display MP3 file names. It is also used to display various messages,
such as effects parameter settings and so on.
11. TIME DISPLAY. These indicators will detail the current Minutes, Seconds, and
Frames. The meter will display either the elapsed time or remaining time of a track
or the total remaining time of the entire disc. The display time will depend on the
selected time function. The selected time function will be displayed above the
TIME METER as either REMAINING TRACK TIME OR ELAPSED TRACK
TIME.
12. TIME BAR. This bar gives a visual representation of the time remaining or time
elapsed. This bar will begin to flash shortly before a track ends.
13. PARAMETER. Shows the current BPM count, or tempo of the music. Also shows
the X and Y parameters while they are being adjusted.
14. X / Y/ BPM indicator. Indicates whether PARAMETER is displaying the BPM or
effect parameters.
15. ANTI SHOCK AND BUFFER indicator. Indicates the current status of the buffer
memory. This is represented on the display by a bucket being filled or emptied. The
bucket itself represents the instant start function (which works by buffer memory).
If the bucket is flashing, the instant start is not available. Each bar within the bucket
represents 2 seconds of anti shock protection. There is up to 10 seconds of anti
shock protection available.
16. CUE indicator. Indicates the unit is at a cue point and is ready to play.
17. HAND indicator. POWER TOUCH SENSITIVE indicator, the Indicator will
appear when anything touches the jog wheel.
18. WHEEL indicator CD DIRECTION indicator. This will display the direction the
CD is rotating. Counter-Clockwise rotation means the CD is playing in reverse. It
also indicates the speed of the forward and reverse search operation.
19. / indicator The "
" indicator will glow when the drive is in pause or CUE mode.
20. LOOP indicator. Indicates when there is a previously set loop, and that the loop is
ready to be played again.
21. RELOOP indicator. Indicates there is a loop active.
" indicator will glow when the unit is in play mode. The "