Connecting To The Tv; Inserting The Batteries (Aaa X 2) - Samsung THE TIMELESS GALLERY S9 Manual Del Usuario

Connecting to the TV

In order to operate the TV using a Smart Touch Control, you must first pair it
to the TV via Bluetooth. However, the Smart Touch Control is only available for
the paired Samsung TV.
✎ We recommend to use the Smart Touch Control in less than 20ft(6m).
A usable distance may differ depending on the wireless environmental
conditions.
1. To turn on the TV, point the Smart Touch Control at the remote control
receiver of the TV and press the
location may vary depending on the model.
2. A Bluetooth icon will appear at the bottom left of the screen as shown
below. The TV will then attempt to connect to the Smart Touch Control
automatically.
<Attempting to connect and completion icons>
P button. The remote control receiver's

Inserting the Batteries (AAA X 2)

1
1. Slightly lift the battery cover using a plastic card. Next, pull on the cover's
notch with a fingernail to remove the cover completely.
Check the location of the battery cover groove. The groove's location
✎
may vary depending on the type of Smart Touch Control is provided
with the product.
2. Insert 2 AAA batteries, making sure to align the positive and negative ends
correctly.
3. Align the battery cover with the back of the remote control, and then press
down along the edges until it is completely attached to the remote control.
English - 6
2 3