Additional Macintosh Audio Settings - Audio-Technica AT-LP2D-USB Guía De Software

Additional Macintosh audio settings

We have set the Audacity playback and record settings. Now it's time to set the
separate Macintosh audio playback and record settings.
1. Go to Applications > Utilities > then select and open
2. In the Audio Midi window under the tab
• Under System Settings, Default Input, select
• Under System Settings, Properties For, select
• Under Default output, select Built-in
• For System output, select Built-in
This will allow other programs (in addition to Audacity) to use your Mac's internal
sound card for audio output.
Audio MIDI Setup.
Audio Devices, select the following:
USB Audio CODEC.
USB Audio CODEC.
Audio, or Built-in Output.
Audio.
EN
19