Setting Up Your Pc (With Windows Vista) To Work With At-Lp2D-Usb Turntable - Audio-Technica AT-LP2D-USB Guía De Software

Setting up your PC (with Windows Vista) to work with AT-LP2D-USB Turntable

(for either pyro Audio Creator or Audacity software packages included with your turntable)
1. Start menu > Control Panel > Sound.
Begin at your Start menu. Select Control Panel (classic view).
2. Select (double-click) Sound.
3. Select the Recording tab. Make sure that the
default recording device. (You should see a green check mark beside
CODEC.)
NOTE: If the "USB Audio CODEC" option does not appear, check the USB cable
to ensure it is properly connected to the USB port.
USB Audio CODEC is set as the
USB Audio
EN
7