Remote Control - Vision VFM-F30 Manual Del Propietário

ACCESSORIES

REMOTE CONTROL

1
2
3
RESET Press-and-hold for 3 seconds until beep. It will travel to the bottom and beep
1.
twice when finished.
2. SEND TO LOWEST POSITION Press-and-release
3. GO TO MEMORY POSITION
4. PAIRS THE REMOTE TO CONTROL BOX
5. MOVE UP
6. MOVE DOWN
7. SET MEMORY Adjust to desired height. Press-and-hold mem button for three seconds
until beep.
USE EXTREME CARE
THE STAND MIGHT CRUSH A PERSON, OR THE DISPLAY COULD BECOME
DISLODGED AND FALL ON A PERSON. SERIOUS INJURY MAY OCCUR.
LOWERING STAND. KEEP OBSTACLES WELL CLEAR.
4
5
6
7
4
VFM-F30_manual_en.doc