17.8. Repeat functions/random playback
Press the REPEAT/RANDOM button once or several times to run through the
repetition modes. The device has a number of different modes:
− Repeat individual track (REPEAT flashes),
− Repeat the current album (REPEAT and the number of the current album
flashes, e.g. F001),
− Repeat all tracks (REPEAT and the number of the current track flashes, e.g.
T001).
− Random playback (RND is shown on the display)
− Intro playback. All tracks are played for 10 seconds. (INTR will appear briefly
the display).
If you have programmed a playlist (see previous sec-
tion),
peat function. All programmed tracks are repeated.
18. Cassette operation
Press the CD/USB/TAPE/LINE IN button once or several times until TAPE ap-
pears on the display.
18.1. Inserting a cassette
Press the STOP/EJECT , button to open the cassette compartment.
Insert a cassette into the compartment grooves with the tape side facing up.
The side to be played faces forwards.
Push the compartment closed.
18.2. Playing, stopping and pausing a cassette
Press the PLAY, button to start playing the cassette.
You can stop playback by pressing the STOP/EJECT
You can pause playback by pressing the PAUSE button. Press the button
again to resume playback.
Once the end of the tape is reached, playback stops automatically.
18.3. Fast-forwarding and rewinding
Press the F.FWD or REW buttons to fast forward or rewind the tape.
Press the STOP/EJECT
this button if you have reached the end or the beginning of the tape.
Do not switch immediately from fast-forwarding or rewinding to playing. Stop
the tape first to protect the tape from wear.
60
does not flash upon activation of the re-
REPEAT
button to stop fast-forwarding. You can also press
button.