Draining The Water - ALFA Next 30 Iron Manual Del Usuario

NEXT 30 Iron
Build-in
Anti-scale System
The build-in anti-scale cartridge is designed to reduce the build-up of lime scale which occurs
during steam ironing. This will prolong the working life of your iron.
Note; The anti-scale cartridge will not completely stop the natural process of lime scale build-up.
Auto Shut-off Features:
The Auto shut-off feature will operate automatically when the iron is connected to a mains supply
outlet but immobile for a period of time.
Auto shut-off in horizontal
1. The iron will switch off automatically at around 30 seconds if the iron is immobile in the
ironing
position (horizontal).
2. Pilot light blinks, indicating the iron is in Auto-Off mode.
3. To use again, simply move the iron it will be ON.
Auto-shut off in vertical
1. The iron will switch off automatically at around 8 minutes if the iron is left on its
heel rest position(vertically).
2. Pilot light blinks, indicating the iron is in Auto-Off mode
3. To use again, simply move the iron it will be ON.
Note: The iron will take about 60 seconds to reach its previous soleplate
temperature.

Draining the Water

1. Disconnect the iron from the mains supply outlet.
2. Move the Steam control knob to
3. Open the water inlet cover and remove water from water tank as Fig 10.
4. shake it to remove any remaining water out of filling hole.
5. When the iron gets cool completely, store it vertically in a safe place.
position.
FIGURE 10
Mod.7806