NEXT 30 Iron
Mod.7806
FIGURE 7
Burst of Steam in Vertical Position
Warning: Do not apply steam on any clothes or fabrics that are being worn by human or pets.
Temperature of steam is very high.
This function provides extra amount of steam to remove wrinkles on delicate garments in hanging
position, hanging curtains, or other hanging fabrics.
1. Fill the iron as described in the section of How to Fill Water.
2. Connect the iron with a suitable mains supply outlet,
pilot light will glow for a second then goes off.
3. Turn the Temperature Dial to ''
(3-dot)' or 'MAX' position.
4. Pilot light will glow to indicate that the iron is heating up.
5. Pilot light goes off when the required temperature is reached.
6. The iron is now ready for use.
7. Hold the iron between 15 to 30 centimeters away from the garment.
8. Press the Burst of steam button.
9. Steam will penetrate into the garment to remove the wrinkles.
10. Wait for few seconds before pressing the Burst of Steam Button again.
Note:It may be necessary to press the burst of steam button few times to start this function.For
optimum steam quality, do not operate the Burst of steam more than three times in succession.
FIGURE 8