Nomenclature; Safety; Intended Use - SMA SSM-U-1610 Instrucciones De Instalación

2 Safety
1.4

Nomenclature

Complete designation
Ethernet overvoltage protection set for
SMA String-Monitors
SMA String-Monitor
2 Safety
2.1

Intended Use

The overvoltage protection unit protects the Ethernet connection from surge voltage.
The overvoltage protection unit is only permitted for installation in the following SMA Solar
Technology AG devices:
• SMA String-Monitor:
– SSM-U-1610 / SSM-U-1615
– SSM-U-2410 / SSM-U-2415
– SSM-U-3210 / SSM-U-3215
The SMA String-Monitor still complies with the applicable standards after the product has been
installed.
All work on the product must only be performed using appropriate tools and in compliance with the
ESD protection regulations.
Use this product only in accordance with the information provided in the enclosed documentation
and with the locally applicable standards and directives. Any other application may cause
personal injury or property damage.
Alterations to the product, e.g. changes or modifications, are only permitted with the express written
permission of SMA Solar Technology AG. Unauthorized alterations will void guarantee and
warranty claims and in most cases terminate the operating license. SMA Solar Technology AG
shall not be held liable for any damage caused by such changes.
Any use of the product other than that described in the Intended Use section does not qualify as
appropriate.
The enclosed documentation is an integral part of this product. Keep the documentation in a
convenient place for future reference and observe all instructions contained therein.
20 SSMAbleitKomm-IA-xx-11
SMA Solar Technology AG
Designation in this document
• Overvoltage protection set
• Product
DC sub-distribution
Installation Manual