Audio Setup Page - Naxa NDL-256 Manual De Operación

Angle On: An angle mark is displayed on screen when an
Mark additional camera angle is available. While the angle
mark is on screen, press the ANGLE key on the remote
to cycle through the available camera angles.
Off: Disables this function.
L L
This function only works with those discs
mastered with multiple camera angles.
OSD Lang On screen display language. Set the language of
the on-screen display and system menus with
this item.
Captions On: Displays captions on screen when they are
available.
Off: Disables this function.
Screen • On: If the image remains motionless on the screen
Saver for several minutes, (e.g., the disc is paused,
stopped etc.) a screen saver will appear on the
screen. Press any key to exit the screen saver.
• Off: Disables this function.
Last • On: During playback or in the paused/stopped
Memory mode when you open the disc tray, the unit will
memorize the last playback time. The next time
that you insert the same disc and close the disc
tray to load the disc, the unit will play from the
memorized point.
• Off: Disables this function.
www.naxa.com

Audio Setup Page

Speaker Setup • Downmix > LT/RT: Rear surround audio is
mixed together and output through both
left and right speakers.
• Downmix > Stereo: Rear surround audio is
kept in separate channels. Rear left audio
is output through the left speaker; rear
right audio is output through the right
speaker.
Page 27