Playing Connected Devices - Naxa NDL-256 Manual De Operación

1. When you set the Boombox to Bluetooth mode and
it does not detect a paired device, it will automati-
cally switch to pairing mode. The FM ST/PAIR in-
dicator [17] will flash blue when the Boombox is in
pairing mode.
2. On your Bluetooth device, go to its Bluetooth set-
tings menu.
3. Have your Bluetooth device "search for devices".
Select the boombox (NAXA NDL-256) when it is
found. Enter 0000 as a passkey if the device asks
for one.
4. When pairing is complete, the Boombox will emit a
soft tone and the FM ST/PAIR indicator will light a
steady blue.
The boombox will automatically connect to your Blue-
tooth device next time as long as it has Bluetooth en-
abled, is within range, and is set to be visible to paired
devices.
L L
If the pairing process fails, the FM ST/PAIR
indicator will flash slowly. Press PLAY/
PAUSE/ENTER/PAIR [11] to return to pairing
mode and then repeat steps 2-4.
www.naxa.com
L L
There are many different Bluetooth en-
abled devices; we cannot provide instruc-
tions for all of them. Please refer to your
device manufacturer's instructions or
website to learn more about connecting
with Bluetooth.

Playing Connected Devices

Control playback from your Bluetooth device.
Set the volume level of the Bluetooth device to maxi-
mum, then adjust the volume to a comfortable level by
turning the VOLUME dial [2] of the boombox.
Basic playback (such as play/pause, next, previous)
may also be controlled by the boombox and its remote
control if your Bluetooth device supports it.
Page 23