Olympus LS-10S Instrucciones página 29

2
Press the REC s button and prepare to
record.
[Level Fixed?] will flash
on the display.
• To use voice sync recording, set [V-Sync.
Rec] on and set the detection time (☞
P.44).
3
Press the 9 or 0 button to adjust
the voice sync level.
Appears the voice sync
level in 23 steps ([01] to
[38]) on the display.
a
• The higher the value, the more sensitive
the recorders gets to sounds. At the highest
value, even the faintest sound will activate
recording.
a Voice sync level (moves to the right/left
according to the set level)
4
Press the REC s button again.
• Recording enters standby. [Standby]
flashes on the display and the recording
indicator light flashes.
If input meets or exceeds the voice sync
level, recording starts automatically. At this
time, the recording indicator light glows.
5
Recording stops automatically.
• If the volume is equal to or less than voice
sync level for longer than the specified time,
recording stops automatically. At this time,
the recording indicator light turns off.
To manually stop recording, press STOP 4
•
button.
Recording
2
29