Installation Instructions - American Standard GZ16B Manual Del Propietário

INSTALLATION INSTRUCTIONS

1
INSTALL SPOUT
• Insert the SPOUT and HOSES (1) through the deck
hole.
NOTE: Deck thickness - 8 mm to 50 mm
NOTE: Deck hole diameter - 25 mm to 28 mm
• Install RUBBER WASHER (2) and METAL
WASHER (3).
• Thread the MOUNTING NUT (4) on to the shank
and tighten to secure the faucet.
C
2
INSTALL CONTROL BOX PENDANT
• Drill holes in the wall under the sink 94 mm apart.
NOTE: Recommended height is 350 mm above the
floor to avoid interference with the soap bottle and
300 mm below the counter top to provide overhead
clearance for installing the control box.
• OPTIONAL: Use DRY WALL ANCHORS (2) if
applicable.
• Thread the SCREWS (1) through the CONTROL
BOX PENDANT (3) and in to the wall to secure it.
A E F
DECK
2
3
4
94 mm
2
1
3
1