Festo VIFB-21 Serie Manual Del Usuario página 12

2 Konfiguration
Please note
The connecting cables prevent the cover from being
removed completely when the node is opened.
Caution
The components on the valve terminal contain electros
tatically vulnerable elements. Do not, therefore, touch
the contact surfaces of the plug connectors. If the re
gulations for handling electrostatically vulnerable com
ponents are not observed, these components may be
damaged.
During normal commissioning the node must not be open
ed. Proceed as follows in the case of a special configura
tion:
1. Switch off the power supply.
2. Open the node (do not lose the screws).
3. Set the baud rate (factory setting 2 MBaud)
4. Display/mask out error messages.
5. Close the node.
12 Festo VIFB21−03−−... 0304b English