Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
9.3.1 - ENTER SETTING STEP BY STEP
•
Wired input 1:
1.
Press and hold MENU button for at least 1 second.
2.
Select the item of the menu param and confi rm the selection by pressing the MENU button for at least 1 second.
3.
Select the item of the menu Input and confi rm the selection by pressing the MENU button for at least 1 second.
4.
Select the item of the menu I01 and confi rm the selection by pressing the MENU button for at least 1 second.
5.
To modify the Funct parameter, press and hold the MENU button for at least 1 second.
6.
Set the Funct parameter to 3 and confi rm by pressing the MENU button for at least 1 second.
7.
Press brie• y the MENU button for 2 times to quit the Input menu.
8.
Select the item of the menu rtime and confi rm the selection by pressing the MENU button for at least 1 second.
9.
Select the item of the menu r01 and confi rm the selection by pressing the MENU button for at least 1 second.
10. Select the item of the menu LIfe and confi rm the selection by pressing the MENU button for at least 1 second.
11. Set the parameter to 1 (1 second) and confi rm by pressing the MENU button for at least 1 second.
12. Select the item of the menu dLy and confi rm the selection by pressing the MENU button for at least 1 second.
13. Set the parameter to 30 (30 seconds) and confi rm by pressing the MENU button for at least 1 second.
14. Press brie• y the MENU button for 4 times to quit the menu.
•
Wired input 2:
1.
Press and hold the MENU button for at least 1 second.
2.
Select the item of the menu param and confi rm the selection by pressing the MENU button for at least 1 second.
3.
Select the item of the menu Input and confi rm the selection by pressing the MENU button for at least 1 second.
4.
Select the item of the menu I02 and confi rm the selection by pressing the MENU button for at least 1 second.
5.
To modify the Funct parameter, press and hold the MENU button for at least 1 second.
6.
Set the Funct parameter to 0 and confi rm by pressing the MENU button for at least 1 second.
7.
Press brie• y the MENU button for 4 times to quit the menu.
•
Wired input 3:
1.
Press and hold the MENU button for at least 1 second.
2.
Select the item of the menu param and confi rm the selection by pressing the MENU button for at least 1 second.
3.
Select the item of the menu Input and confi rm the selection by pressing the MENU button for at least 1 second.
4.
Select the item of the menu I03 and confi rm the selection by pressing the MENU button for at least 1 second.
5.
To modify the Funct parameter, press and hold the MENU button for at least 1 second.
6.
Set the Funct parameter to 2 and confi rm by pressing the MENU button for at least 1 second.
7.
Press brie• y the MENU button for 2 times to quit the Input menu.
8.
Select the item of the menu rtime and confi rm the selection by pressing the MENU button for at least 1 second.
9.
Select the item of the menu r03 and confi rm the selection by pressing the MENU button for at least 1 second.
10. Select the item of the menu LIfe and confi rm the selection by pressing the MENU button for at least 1 second.
11. Set the parameter to 1800 (30 minutes) and confi rm by pressing the MENU button for at least 1 second.
12. Press brie• y the MENU button for 4 times to quit the menu.
•
Wired input 4:
1.
Press and hold the MENU button for at least 1 second.
2.
Select the item of the menu param and confi rm the selection by pressing the MENU button for at least 1 second.
3.
Select the item of the menu Input and confi rm the selection by pressing the MENU button for at least 1 second.
4.
Select the item of the menu I04 and confi rm the selection by pressing the MENU button for at least 1 second.
5.
To modify the Funct parameter, press and hold the MENU button for at least 1 second.
6.
Set the Funct parameter to 2 and confi rm by pressing the MENU button for at least 1 second.
7.
Press brie• y the MENU button for 2 times to quit the Input menu.
8.
Select the item of the menu rtime and confi rm the selection by pressing the MENU button for at least 1 second.
9.
Select the item of the menu r04 and confi rm the selection by pressing the MENU button for at least 1 second.
10. Select the item of the menu LIfe and confi rm the selection by pressing the MENU button for at least 1 second.
11. Set the parameter to 43200 (12 hours) and confi rm by pressing the MENU button for at least 1 second.
12. Press brie• y the MENU button for 4 times to quit the menu.
•
Learning and setting of the default transmitter with 4 channels:
NOTE: the setting of the default transmitter is necessary only for the fi rst remote control.
1.
Press and hold the MENU button for at least 1 second.
2.
Select the item of the menu Modif and confi rm the selection by pressing the MENU button for at least 1 second.
3.
Select the item of the menu Pdef and confi rm the selection by pressing the MENU button for at least 1 second.
4.
Select the item of the menu btn and confi rm the selection by pressing the MENU button for at least 1 second.
5.
Select the item of the menu b01 and confi rm the selection by pressing the MENU button for at least 1 second.
6.
Select the item of the menu f00 and confi rm the selection by pressing the MENU button for at least 1 second.
7.
Enable the key in the CH:01 output and confi rm the selection by pressing the MENU button for at least 1 second.
8.
Disable the key in the CH02 output and confi rm the selection by pressing the MENU button for at least 1 second.
9.
Disable the key in the CH03 output and confi rm the selection by pressing the MENU button for at least 1 second.
10. Disable the key in the CH04 output and confi rm the selection by pressing the MENU button for at least 1 second.
11. Select the item of the menu Pdef and confi rm the selection by pressing the MENU button for at least 1 second.
12. Select the item of the menu btn and confi rm the selection by pressing the MENU button for at least 1 second.
13. Select the item of the menu b02 and confi rm the selection by pressing the MENU button for at least 1 second.
14. Select the item of the menu f00 and confi rm the selection by pressing the MENU button for at least 1 second.
18/20
ITA
ENG
FRA
ESP
DEU
POR
6-1620020
rev.0
27/10/2015
Publicidad
Tabla de contenido
