Technical Features - Allmatic B.RO X40 DISPLAY Manual Del Usuario

15. Disable the key in the CH01 output and confi rm the selection by pressing the MENU button for at least 1 second.
16. Enable the key in the CH:02 output and confi rm the selection by pressing the MENU button for at least 1 second.
17. Disable the key in the CH03 output and confi rm the selection by pressing the MENU button for at least 1 second.
18. Disable the key in the CH04 output and confi rm the selection by pressing the MENU button for at least 1 second.
19. Select the item of the menu Pdef and confi rm the selection by pressing the MENU button for at least 1 second.
20. Select the item of the menu btn and confi rm the selection by pressing the MENU button for at least 1 second.
21. Select the item of the menu b03 and confi rm the selection by pressing the MENU button for at least 1 second.
22. Select the item of the menu f01 and confi rm the selection by pressing the MENU button for at least 1 second.
23. Disable the key in the CH01 output and confi rm the selection by pressing the MENU button for at least 1 second.
24. Disable the key in the CH02 output and confi rm the selection by pressing the MENU button for at least 1 second.
25. Enable the key in the CH:03 output and confi rm the selection by pressing the MENU button for at least 1 second.
26. Disable the key in the CH04 output and confi rm the selection by pressing the MENU button for at least 1 second.
27. Select the item of the menu Pdef and confi rm the selection by pressing the MENU button for at least 1 second.
28. Select the item of the menu btn and confi rm the selection by pressing the MENU button for at least 1 second.
29. Select the item of the menu b04 and confi rm the selection by pressing the MENU button for at least 1 second.
30. Select the item of the menu f01 and confi rm the selection by pressing the MENU button for at least 1 second.
31. Disable the key in the CH01 output and confi rm the selection by pressing the MENU button for at least 1 second.
32. Disable the key in the CH02 output and confi rm the selection by pressing the MENU button for at least 1 second.
33. Disable the key in the CH03 output and confi rm the selection by pressing the MENU button for at least 1 second.
34. Enable the key in the CH:04 output and confi rm the selection by pressing the MENU button for at least 1 second.
35. Press brie• y MENU button for 2 times to quit the menu.
36. Press brie• y the UP (+) button to carry out the default learning.
37. Press the key of the transmitter that you want to memorize.
10

TECHNICAL FEATURES

Coding
Memorisable transmitters
Power supply
Number of outputs
Outputs operating modes
Number of wired inputs
Antenna
Frequency
Range
Relay contact
Temperature of use
* The radio range depends on the transmitter, the antenna and the interferences on the fi eld.
GUARANTEE
In compliance with legislation, the manufacturer's guarantee is valid from the date stamped on the product and is restricted to
the repair or free replacement of the parts accepted by the manufacturer as being defective due to poor quality materials or
manufacturing defects. The guarantee does not cover damage or defects caused by external agents, faulty maintenance, overloading,
natural wear and tear, choice of incorrect product, assembly errors, or any other cause not imputable to the manufacturer. Products
that have been misused will not be guaranteed or repaired.
Printed specifi cations are only indicative. The manufacturer does not accept any responsibility for range reductions or malfunctions
caused by environmental interference. The manufacturer's responsibility for damage caused to persons resulting from accidents of
any nature caused by our defective products, are only those responsibilities that come under Italian law.
6-1620020 rev.0
ITA ENG
27/10/2015
Rolling code
1000 with dedicated memory
12 / 24 Vdc / Vac
4 N.O./N.C.
• Dead Man
• Step by Step
• Timed
• Timed with delay
4 (N.O. contact)
Tuned at 433.92 MHz
433.92 MHz
80 - 250 m (*)
16A a 230 Vac
-10...55 °C
FRA ESP DEU POR
19/20