Publicidad
Idiomas disponibles
Idiomas disponibles
Guia de serviço
Soluções de problemas
L1'::,.
Notes
Por favor, confirme! O seguinte conteúdo antes! Ele confiou a manutenção
Problems encountered
The air quality indicator
keeps red during
continuous operation.
The purifier can'! run
The effect of removing
smoke and odor is poor.
The air quality indicator
does not change
Filler cleaning light does no!
go out
Odor and smoke are
difficult to remove
Se ocorrerem as seguintes condições, envie o reparo agora:
1. A operação não é normal ou não está funcionando, é inválido para lidar com o
método acima;
2. Entra matéria estranha ou água e a operação não é normal.
Reason
Maybe the room area exceeds
!he purification capacity of the
machine The filler components
may no! have been installed
The power cord may no! be
plugged in, or !he power cord
may not be in good contact.
The power switch may no! have
been turned on
Maybe the filler components
are not installed Maybe !he
filler components have expired
Maybe the air inlet is blocked
by foreign objects
11 may be that !he sensitivity of
!he sensor is unslable for a
period of time alter the start of
operation. 11 it doesn't change
alter turning green, the air may
be in a clean state 11 may be
placed in a location where dirt
monitoring is difficult, or the
sensor is dirty The strong
indoor odor may cause !he
sensor sensitivity to decrease
lt may be that afier cleaning the
filler components, the "negative
ion" button was no! long
pressed for 3 seconds
11 may be that !he filler assembly
is still wrapped in !he package
Troubleshooting
Please keep the purifier running
continuously Please inslall the
filler components correctly
Please plug in !he power and
make good contact Please turn
on !he power switch
Please inslall the filler components
correctly Please replace the new
filler assembly Please remove !he
foreign matter from !he air inlet
Please wait, alter a few minutes
of operation, !he sensor will
stabilize Blow the cigarette to
the sensor. 11 the indicator color
changes, it is normal Please
move the purifier or clean !he
sensor Please adjust the fan
speed to high grade and run for
several hours to 1 day
Alter cleaning the filler componenls,
long press the "negative ion"
button for 3 seconds
Please remove the packing bag
outside the filler components
8
Publicidad
