Technical Data - Stagnoli SATURNO-S Manual De Usuario

INSTALLATION AND PROGRAMMING INSTRUCTIONS
We recommend that you read this instruction manual carefully before installing this product.
Improper use of the product or a connection error could compromise the correct operation of the product and the safety of the end user.
The Master board is the board on which the programming is carried out, and which takes control of all slaves as per configuration. It
is provided with onboard server and an ESP for connection via Wi-Fi, it has two inputs: one for emergency and one to force the stand-
POWER SUPPLY
230V ~±10% - 50Hz
master board the status of the traffic light and its sensors, it also performs any commands received. Each slave is provided with 4 outputs,
one for each colour, and a programmable auxiliary output, it also has 3 inputs operating in different ways according to the defined opera-
230V ~±10% - 50Hz
The SATURNO system is intended for the management of logistic traffic, in alternate one-way directions, ramps, industrial areas and
parking lots. Once installed, Saturno can be considered as an industrial network communicating between the various boards via industrial
serial port 485. Each master card can manage a maximum of 10 slaves, each slave can manage 1 traffic light, 1 auxiliary output, 3 pro-
Any use other than that described above and any installation other than that described in the following technical manual are to be conside-
This booklet is intended for qualified installation technical personnel.

TECHNICAL DATA

OPERATING
IP
TEMPERATURE
65 -20°C / +60°C
The Slave board is the board dedicated to communicating to the
POWER SUPPLY IP
65
USE AND RESTRICTIONS OF USE
grammable inputs, one of which for emergency use.
red prohibited and will be sufficient for the warranty to be invalidated.
MASTER
by mode.
CONTROLLABLE COMMUNICATION
SLAVES
10
SLAVE
tion mode.
OPERATING
TEMPERATURE
-20°C / +60°C
MAX DISTANCE
PROTOCOL COMMUNICATION
RS-485 1Km
COMMUNICATION
PROTOCOL
RS-485
IT
EN
FR
ES
DE
13