Stagnoli SATURNO-S Manual De Usuario página 18

1
Look for the Wi-Fi network indicated on
the first page of this manual. In case the
network is not displayed immediately ple-
ase wait for a few seconds.
Stagnoli Saturno-00111AFF
IT
In case of slowdowns during the connection, make sure that only one device is connected to the network.
EN
FR
ES
4. WiFi configuration, where you can customize the name of the WIFI, change its Password or the radio channel in use. Please note that if
one of these parameters is modified, it will be necessary to restart the master and reconnect to the newly modified network.
5. Saving and resetting, this screen allows you to download a backup file of all settings, useful for systems with more than one master and
DE of course to keep a record of the settings in case of failures. It is also possible to upload a backup file into this screen if you already have it.
6. Help, online help explaining every single field in the user interface, from logic to configuration fields. In the whole interface there is also
another type of help, lingering on a field or on a label, it will appear a short text with the description of the object itself.
The system cycles normally according to the pre-set programming, operating without any sensor. However, both the emergency and default
inputs are taken into consideration and the auxiliary outputs of the slaves can also be programmed.
The system will switch on according to the set stand-by state. At the first priority request, the set area clearing time will be executed and
only after it has been completed the green light will be given to the traffic light requesting it. Only if "Overlay of greens" is active, priority
will be given to all the traffic lights requesting it, leaving green also the traffic lights with the "Green in stand-by" setting
Combined-operation logic is used to manage more complex systems because it allows green waves to be executed, according to the times
required. The main difference between the booking logic and the combined logic is that the booking logic only executes the cycle of the
traffic light from which it received the priority, while the combined logic takes as its starting point the traffic light from which it received the
priority and then executes one by one the cycles of the following traffic lights, applying the area clearance time only at the beginning and
By setting the capacity and free places (at that precise moment) for each traffic light, the slaves will work exclusively on the reference traffic
By setting the global capacity and the free places (at that precise moment) the various slaves will increase a single counter, so once the
maximum is reached all the traffic lights will turn red. Useful to manage parking lots or areas with multiple entrances and exits.
18
CONNECTION TO THE MASTER BOARD
Access it using the default Password
shown on the first page of this manual.
questo manuale.
The network can handle up to 3 devices simultaneously.
Alternatively, please restart the Wi-Fi connection of the smart device you are using.
The Saturno board has 6 main pages:
1. Machine information, where the version of the firmware in use is reported.
2. Traffic lights status, where it is possible to see in real time the status of the system.
3. Configuration, where you can set up the entire system.
light, therefore useful to cover a multi-storey car park.
2
Warning!
INTERFACE
LOGICS
TIME
BOOKING
COMBINED
at the end of a cycle.
PARKING
• For each traffic light
• Global
3
Once logged in, open the browser of your
smart device and type in the following
address: http://192.168.4.1
www.stagnoli.com