Kasper & Richter My fitty Manual Del Usuario página 13

Step-Counter/Pedometer
1. The upper line displays the number of steps taken. This pedometer automatically records all steps,
if you attach the instrument correctly as shown above.
2. In order to view distance (km), press the button [MODE] several times until DISTANCE appears
in the lower left of the display.
3. You can reset all values to zero by pressing [é/RESET] button.
(All values of steps, distance, calories and timer will be reset.)
4. To display the total distance, press the button [MODE] several times until DISTANCE TOTAL
appears in the lower left of the display.
5. You can reset the total distance to zero by pressing [é/RESET] button for 10
seconds.
(ALL values of steps, distance, calories and timer will be reset.)
Calorie consumption
1. Press the button [MODE] several times until the display shows „ CALORY"
calculate the calories consumed from number of steps taken and your body weight.
2. You can reset all values to zero by pressing [é/RESET] button for 5 seconds.
(All values of steps, distance, calories and timer will be reset.)
Timer
1. Press the button [MODE] several times until the display shows „ TIMER" . The pedometer will record
the length of time ONLY while you are actively walking or running. Display will show after 1 min.
2. You can reset all values to zero by pressing [é/RESET] button.
(All values of steps, distance, calories and timer will be reset.)
EL-backlight:
Press the button [êEL] to activate the EL-backlight. It expires after 5 seconds.
[KCAL]. The pedometer will