Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Grow-Flex™ Feed Systems
Installation Instructions:
1. Select location to mount the HS765. Location should provide adequate ventilation with safe and easy
access.
2. Secure enclosure using four mounting feet provided.
3. Drill template provided for the installation of liquid tight connectors. Install with liquid tight connectors
on the bottom of the enclosure to help prevent water intrusion.
4. Wire HS765 Isolator per instructions below for Grower Select control units or similar product that utilizes
a relay to isolate the motor amps from the HS765 isolator. The HS765 is not recommended for the
Grower Select HS593(HS589) or others that do not contain a relay that do not isolate the motor amps
from the control signal.
Wiring Instructions:
Hog Slat Inc. Newton Grove, NC USA December 2018
2
Publicidad
Tabla de contenido
