BLUEFIN Fitness TOUR SPIN Manual De Instruccion página 9

ASSEMBLY INSTRUCTION
Step 4.
The Pedals (1L & 1R) are marked "L" and "R" - Left and Right. Connect them to their appropriate
crank arms. The right crank arm is on the right- hand side of the cycle as you sit on it.
NB: The Right pedal should be threaded on clockwise and the Left pedal anticlockwise.
To increase or decrease the tension, turn the adjustable knob to the right or left. To use the
emergency brake firmly press the knob down.
• To adjust the seat height, slacken the spring knob on the vertical post stem on the main
frame and pull back the knob. Position the vertical seat post for the desired height so that
holes are aligned, then release the knob and retighten it.
• To move the seat forward in the direction of the handlebar or backwards away from it, loosen
the adjusting knob and washer and pull the knob back. Slide horizontal seat post into desired
position. Align holes and then retighten the adjusting knob.
• To adjust the handlebar height, slacken the spring knob and secondary knob and pull both
knobs back. Slide the handlebar post along the housing on the main frame to the desired
height and, with the holes aligned correctly, tighten the spring adjusting knob and then the
secondary knob.
(cont.)