Kenmore 116.39110 Manual De Uso Y Cuidado página 19

Hinge Pin
Hole
Dust Bag
Hinge Pin
Hole,
Cover
t
Dust Bag
Cover
To reinstall or replace dust bag cover.
1. Align dust bag cover hinge pin with
hinge pin hole in dust container.
2. Rotate dust bag cover into place.
3, You should hear a noticeable click
when hinge pin snaps into place.
::, = :: ..... :........ ............... :: : ,:: :,= ....... : : :::::i
To maintain efficient cleaning, the agitator
must be kept free of carpet fiber, string, or
hair build-up, After every 7 to 10 uses,
unplug and turn vacuum cleaner over and
check agitator for fiber and hair build-up,,
Use scissors to remove any build-up entan-
gled around the agitator.
Always follow all safety precautions when
performing maintenance to the vacuum
cleaner,,
WARNBNG
Electrical Shock Or Personal Injury
Hazard
Disconnect electrical supply before
performing maintenance to the
vacuum cleaner. Failure to do so
could result in electrical shock or
personal injury from the vacuum
cleaner suddenly starting.
1. Using a flat screwdriver or small coin pry
gently between the cover and the nozzle to
access the clean-out port.
S crewdrfver
Clean-Out
Port Cover
I9
2. Remove any debris or build-up.
3, Reinstall cover. You should hear a
noticeable click when the cover snaps
place.
into