Kenmore 116.39110 Manual De Uso Y Cuidado página 6

Please pay special attention to these hazard alert boxes, and follow any instruc-
tions given.. WARNING statements alert you to such hazards as fire, electric
shock, burns and personal injury_ CAUTION statements alert you to such haz-
ards as personal injury and!or property damage.
WARNgNG
Electrical Shock Hazard
Do not plug into the electrical supply
until the assembly is complete.
Failure to do so could result in
eletrical shock or injury.
Before assembling the vacuum cleaner,
check the PACKING LIST. Use this list to
verify that you have received all the
components of your new Kenmore
vacuum cleaner°
HANDLE
CAUTaON
Do not overtighten.
Overtightening could strip the screw
holes,
Do not operate the vacuum cleaner
without the screw in place.
1. Remove the handle screw from the
body of the vacuum cleaner
2. Position the handle assembly as
shown in the illustration
3. Using a screwdriver, tighten handle
screw.
NOTE: It may be necessary to adjust the
handle slightly,
Handle
Screw
Hole
Handle