Troubleshooting Tips; Safety Instructions - Dell UltraScan P790 Instalación Rápida

Accessing the User's Guide through Online or CD-ROM
1. To view the most up-to-date Online User's Guide, go to www.dell.com and go to the support section of the website. If you
do not have internet access, continue with step 2.
2. Insert the CD into your CD-ROM drive. A start-up document should launch automatically.
Note: If the start-up document does not launch automatically, click on the START button, RUN, type "D:\monitor.htm", and
click OK. Substitute the correct CD-ROM drive letter if it is not the "D:" drive.
3. Click on the appropriate icon to bring the User's Guide in the desired language.

Troubleshooting Tips

Poor Picture Images
No video/LED off (no power)
S Ensure a tight fit to both the monitor receptacle and the electrical
outlet.
S Test electrical outlet by plugging in working electrical device such
as a lamp.
S Make sure that the power button has been depressed, and wait
for the power LED to light on.
S Try another power cord on the monitor. Use the power cord from
the system and power the monitor on with the signal cable discon-
nected. If monitor is working correctly, a SELF TEST FEATURE
CHECK pattern should appear.
For more information refer to Troubleshooting section in User's Guide on your CD.

Safety Instructions

Please read and follow these instructions when connecting and using your computer monitor:
S Never insert anything metallic into the monitor openings. Doing so may create the danger of electric shock.
S To avoid electric shock, never touch the inside of the monitor. Only a qualified technician should open the monitor's case
S Never use your monitor if the power cord has been damaged. Do not allow anything to rest on the power cord, and keep the cord away
from where people could trip over it.
S Be sure to hold the plug, not the cord, when disconnecting the monitor from an electric socket.
S Openings in the monitor cabinet are provided for ventilation. To prevent overheating, these openings should not be blocked or covered.
Also, avoid using the monitor on a bed, sofa, rug, or other soft surface. Doing so may block the ventilation openings in the bottom of the
cabinet. If you put the monitor in a bookcase or some other enclosed space, be sure to provide adequate ventilation.
S Put your monitor in a location with low humidity and a minimum of dust. Avoid places like damp basements or dusty hallways.
S Do not expose the monitor to rain or use it near water (in kitchens, next to swimming pools, etc.). If the monitor accidentally gets wet, un-
plug it and contact an authorized dealer immediately. You can clean the monitor with a damp cloth when necessary, but be sure to unplug
the monitor first.
S Place the monitor on a solid surface and treat it carefully. The screen can be damaged if dropped, sharply hit or touched with a sharp or
abrasive implement.
S Locate your monitor near an easily accessible AC outlet.
S If your monitor does not operate normally --- in particular, if there are any unusual sounds or smells coming from it --- unplug it immediately
and contact an authorized dealer or service center.
Information in this document is subject to change without notice.
 1999 Dell Computer Corporation. All rights reserved.
Reproduction in any manner whatsoever without the written permission of Dell Computer Corporation is strictly forbidden.
Trademarks used in this text: Dell and the DELL logo are trademarks of Dell Computer Corporation; Microsoft, Windows, and Windows NT are
registered trademarks of Microsoft Corporation; VESA is a registered trademark of Video Electronics Standards Association; IBM is a registered
trademark of International Business Machines Corporation; Adobe is a trademark of Adobe Systems Incorporated, which may be registered in
certain jurisdictions.
Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names, or to their
products. Dell Computer Corporation disclaims any proprietary interest in trademarks or trade names other than its own.
As an ENERGY STAR Partner, Dell Computer Corporation has determined that this product meets the ENERGY STAR guidelines for energy
efficiency.
No video/LED on
S Ensure that the video connector is seated properly. Tighten
screws securely with fingers.
S Ensure that computer is switched on.
S Increase contrast control (direct access adjustment)
S Turn the monitor off and unplug the signal cable. Check for bent
or broken pins.
S With signal cable still disconnected, turn monitor on. If monitor is
working correctly, a SELF TEST FEATURE CHECK pattern should
appear.