ASROCK Fatal1ty Z77 Professional Serie Manual Del Usuario página 38

Serial ATA (SATA)
Data Cable
(Optional)
Serial ATA (SATA)
Power Cable
(Optional)
connect to the SATA
HDD power connector
USB 2.0 Headers
(9-pin USB_6_7)
(see p.4, No. 24)
(9-pin USB_8_9)
(see p.4, No. 25)
USB 3.0 Header
(19-pin USB3_6_7)
(see p.4, No. 9)
Infrared Module Header
(5-pin IR1)
(see p.4, No. 29)
Internal Audio Connectors
(4-pin CD1)
(CD1: see p.4 No. 42)
38
Fatal1ty Z77 Professional Series Motherboard
connect to the
power supply
USB_PWR
P-9
P+9
GND
DUMMY
1
GND
P+8
P-8
USB_PWR
CD-L
GND
GND
CD-R
CD1
Either end of the SATA data
cable can be connected to the
SATA / SATA2 / SATA3 hard
disk or the SATA2 / SATA3
connector on this motherboard.
Please connect the black end
of SATA power cable to the
power connector on each drive.
Then connect the white end of
SATA power cable to the power
connector of the power supply.
Besides six default USB 2.0
ports on the I/O panel, there are
two USB 2.0 headers on this
motherboard. Each USB 2.0
header can support two USB 2.0
ports.
Besides six default USB 3.0
ports on the I/O panel, there is
one USB 3.0 header on this
motherboard. This USB 3.0
header can support two USB 3.0
ports.
This header supports an
optional wireless transmitting
and receiving infrared module.
This connector allows you
to receive stereo audio input
from sound sources such as
a CD-ROM, DVD-ROM, TV
tuner card, or MPEG card.