EAS ELECTRIC EMC1970SW1 Manual De Instrucciones página 33

2)remove the decorative cover, hinge cover, upper hinge, screws, disconnect the box.The top right
@
signal line ((D
terminal),Connect the signal cable (D to the signal cable
@.
the signal cable
3)Take off refrigerating chamber door, middle hinge (use a allen wrench to remove the middle hinge
screw) and hale cap of other side.
4 )Take off freezing chamber door, dismantle bottom hinge, hale caps, levelling foot, lnstall shaft of
bottom hinge on the other side and install the bottom hinge on the other side.
signal line terminal), disconnect the signal line (@
@,
and connect the signal cable
middle hinge
s aft
-+
9
©
signal line
©
to
V.1