Chronometer; Roger Beep On/Off; Button Lock - Silvercrest PMR Manual Del Usuario E Información De Servicio

SilverCrest PMR-1200

6.13 Chronometer

Your PMR-1200 includes a chronometer function for time measurement (minutes:seconds).
It is necessary to start the chronometer within 5 seconds after enabling it or after resetting
the counter, otherwise the unit will toggle back to receiving mode.

6.14 Roger Beep On/Off

If you release the PTT button (13) after transmitting your message, the unit will send a roger
beep to indicate the end of the transmission. If necessary, you can disable this roger beep.

6.15 Button Lock

The button lock helps you to avoid any device settings being changed when a button is
pressed accidentally. The button lock feature does not apply to the buttons
(14), (7), (12) nor the PTT button (13).
22
1. Press the
appear on the display.
2. Press the button to start the chronometer.
3. Press the button again to pause the chronometer. The
counter will continue running in background. Press the
button again to resume the chronometer.
4. While the chronometer is paused, press the
reset the counter.
1. Press the
beep setting will blink on the display.
2. Press the or
the roger beep.
3. Press the PTT button (13) to confirm the setting.
How to enable the button lock
1. Press and hold the
button lock icon (26) will appear on the display.
How to disable the button lock
1. Press and hold the
button lock icon (26) will disappear.
button (5) ten times. The time counter will
button (5) eleven times. The current roger
button to enable ("ON") or disable ("OF")
button (12) for 3 seconds. The
button (12) again for 3 seconds. The
Advanced Operation
button to
(9),
English