Earphones Receptacle - Silvercrest PMR Manual Del Usuario E Información De Servicio

SilverCrest PMR-1200

7. Earphones Receptacle

You can use your PMR sets with the supplied earphones.
The earphones receptacle (4) is located behind a protective cover.
WARNING!
Before connecting the earphones, you must reduce the sound volume (see
page 14) otherwise you risk damaging your hearing due to the high
earphones level. We recommend that you start with the volume level set on
4 and increase it later if necessary.
1. To connect the earphones, open the rubber cover that protects the earphones
receptacle (4).
2. Insert the 2.5mm jack-type earphones plug into the earphones receptacle (4).
3. Fix the earphones cable to a piece of clothing by using the clip attached to the cable
and then insert the earpiece into your ear.
The silver PTT button on the earphones works in exactly the same way as the PTT button
(13) of your PMR. When using the PTT button of the earphones you must speak into the
microphone located on the back of the silver PTT button on the earphones cable.
Warning!
Do not connect any other headphones or earphones, otherwise you risk
seriously damaging your PMR.
Warning!
When using the earphones the IPX2 protection against vertically falling drops of
water with tilted enclosure is not guaranteed.
24
Earphones Receptacle
English