Troubleshooting - Klarstein Steam bro Manual Del Usuario

EN
28

TROUBLESHOOTING

If the device should stop working properly, first check whether you are able to correct
the problem yourself
Do not attempt to repair a defective electrical device yourself!!
Problem
The device does not work.
The operating lamp does
not light up/flash.
Water emerges from the
bottom of the iron.
Odour produced
The device makes loud
pumping noises.
No steam is produced.
Possible cause/solution
• Is the mains plug correctly inserted into the socket?
• Is the socket defective? Try a different socket and
check the fuse of your mains connection.
• Is the water reservoir overfilled? Pour away some
water (see the „After Use" section).
• You might notice a slight odour caused by
production residues the first time you use the
device. However, this is harmless and will cease as
you use the device.
• Is the water reservoir empty? Refill it.
• Is the water reservoir filled with water?
• The steam production is not activated. Press the
steam on/ off button (13).
• If you have set a high temperature, the steam
which is generated is dry and almost invisible. This
is exacerbated by a high ambient temperature.
Switch the temperature control to a lower
temperature to check whether the device is pro-
ducing steam.
• Have you not moved the device for some time? The
automatic safety switch-off function was activated.
Take hold of the handle so that the device switches
back on and heats up again.