Alarm Function; Snooze Function - BALDR B0367STHR Manual De Instrucciones

ALARM FUNCTION

SET ALARM TIME:
1. Press and hold "
2. Press "▲/C/F" or "▼/RCC" button to adjust data; press and hold
"▲/C/F" or"▼/RCC"button will quickly change the data by 8 steps.
3. The setting order is: Hour → Minute→Exit.
4. During setting, touch top button to save and exit setting
5. During setting,If no operation for 20 seconds, it will automatically
save and exit setting.
6. The alarm is default ON after setting the alarm time.Alarm symbol
will display on screen.
TURN ON/OFF ALARM:
1. When in time display mode, press "
alarm time and calendar.
2. Slide the switch
ON/OFF of symbol

SNOOZE FUNCTION

1. When the alarm is ringing, press any other button except top
button to stop the alarm. And the alarm will restart next day.
2. OR when alarm is ringing, press "
snooze function. And the alarm will repeat in each 5 minutes. The
" " symbol will be flashing on screen to indicate the snooze
mode.Press any other button except top button to exit the snooze
mode.And the alarm will restart next day.
3. When alarm rings, the ascending "Bibi" alarm sound will last for 2
minutes if no operation.
" button to enter into alarm time setting mode.
on the back to turn on/off alarm by the
.
12
" button to check between
" button to activate