Placement - EAS ELECTRIC EMC2011GN1 Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

2 Proper use of refrigerators

2.1 Placement

Precautions before installation:
Before installation or adjusting of accessories, it shall be ensured that the refrigerator is
disconnected from power.
Precautions shall be taken to prevent fall of the handle from causing any personal injury.
Before use, remove all packing materials, including bottom cushions,
foam pads and tapes inside of the refrigerator;
tear off the protective film on the doors and the refrigerator body.
Keep away from heat and avoid direct sunlight. Do not
place the freezer in moist or watery places to prevent rust
or reduction of insulating effect.
Do not spray or wash the refrigerator; do not put the refrigerator in
moist places easy to be splashed with water so as not to affect the
electrical insulation properties of the refrigerator.
The refrigerator is placed in a well-ventilated indoor place;
the ground shall be flat, and sturdy (rotate left or right to
adjust the wheel for levelling if unstable).
The top space of the refrigerator shall be greater than 30cm, and
The refrigerator should be placed against a wall with a free distance
more than 10cm to facilitate heat dissipation.
6
V.2

Publicidad

Capítulos

Tabla de contenido
loading

Este manual también es adecuado para:

Emc2011gw1

Tabla de contenido