Hublot MECA-10 Manual De Instrucciones página 12

WINDING
This function means your Hublot clock can accumulate the energy it requires to run properly. It is fitted
with a hand-wound movement.
Use
Turn the winding crown (C) clockwise.
Winding is complete when the power reserve indicator (E) reaches number 10.
Power reserve
When using the clock for the first time or after it has been transported, it is possible that the power
reserve indexing may have changed. The movement therefore needs to be fully wound, then left to fully
run down to 0 so that the hand indexing is correct. Fully wind the movement again to ensure optimal
operation. Take care not to force the crown when the power reserve is full, as this could damage the
clock's mechanism.
Hublot Meca-10 clocks have a power reserve of 10 days, or 240 hours, which is equivalent to around
34 turns of the crown when the power reserve is empty.
12