Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Removing the freezer door
Make sure that you lift the door straight up so the hinges are not bent or broken.
Be careful not to pinch the water tubing and wire harness on the door.
Place doors on a protected surface to prevent scratching or damage.
Is necesary two people for disassembling doors.
With the Freezer door closed, remove the upper hinge cover
disconnect the wires
Be careful, no damage sensor harness with cover hinge.
Remove hinge bolts
to ensure that it does not fall on you.
Before remove the bolts desassembling Cover Leg front and hoses.
Open the Freezer door before lifting it up. Remove the door from the lower hinge
lifting the door
Remove the lower hinge
direction of the arrow.
Make sure to put the water line through the lower hinge before assembling it.
CAUTION
Reattaching the freezer doors
To reattach the freezer doors, replace parts in reverse order.
CAUTION
14_setting up
2
.
1
3
with a 10mm Socket Wrench and a ground screw
the upper hinge
5
in the direction of the arrow. Be careful when removing the door
7
.
7
8
from the lower hinge bracket
8
9
1
using a screwdriver, and then
2
4
3
5
6
9
by lifting the lower hinge in the
4
counter-clockwise,
Pressing
6
by carefully
Publicidad
Tabla de contenido
