Tabla de contenido
Publicidad
d o t 2 U s e r Ma n u a l
Version 1.3
Fixed Bugs
Description
Fixed: The console does not set a new IP right after the execution of the command "Set IP eth0..." and
does not subsequently restart.
Fixed: Fixture symbol view shows an incorrect text of the title bar in the preview mode.
Fixed: Scrollbar in the calculator when changing tabs in dot2.
Added: Moving/copying special master to a main executor is not possible (e.g. Speed fader). An error
message pops up.
Added: Check mechanism for a new global auto-fix option (so that no autofix occurs after manual unfix if
global autofix is off).
Fixed: The command "Copy Executor 1 thru at Executor 1" freezes the desk.
Fixed: The use of the hardkey "Thru" in attribute calculator.
Fixed: After you have changed an entire effect, changing the width in effect editor does not work properly.
Fixed: Fixture ID numbers in new show files are tracked from old show files. Now the fixture ID is reset to 1.
Fixed: Cannot leave the patch & fixture schedule in combination with the Help button.
Fixed: Effect width on the encoder does not work in the correct range
Fixed: The setting of changing the width in the CMD column is not stored
Fixed: Store executors/presets after performing "fixture X at fixture Y" (or "group X at group Y"). Effects were
not running.
Fixed: When switching screen 1 to a locked fixture layout and then returning to fixture output screen (square
view) the scroll function using the encoder wheel does not work.
Fixed: Program time issue when using color picker.
Fixed: Color effects in cues conversion when changing a fixture type. Note : Only the function of "plain and
dumb attribute to attribute" is used here instead of a smart color conversion.
Fixed: If the main executor is deleted, its name must be also removed.
Fixed: If dot2 show files were opened in the grandMA2, effect pool was not automatically unlocked.
Fixed: When scrolling inside the cue view on screen 1 the blue marker next to the last attribute delay time
disappears
Fixed: Function "Move" does not work for multiple objects if you press and hold the key Move.
Fixed: The combination of buttons "Select" + main exec does not allow to trigger button commands, instead
it only allows to perform a selection.
Improved: Auto scroll selects fixtures in fixture sheet.
Fixed: DMX timing is too fast for some fixtures.
Fixed: Automatic auto unblock is not executed when pressing "Oops" consequently upon deleting a cue.
Fixed: Effects cannot be edited in the preview mode.
Fixed: Default values are not replaced after changing the fixture type.
Fixed: Pressing Edit in the "System Clock" does not open a calculator
Fixed: "Restart Mode" is not being grayed out in the executor options if the executor is a chaser.
Fixed: The programmer displays incorrect active values after executing store look.
Fixed: Layout view, which is generated automatically, incorrectly sorts fixture IDs in each of the fixture types.
486
© 2017 MA Lighting Technology GmbH | Dachdeckerstr. 16 | D-97297 Waldbüttelbrunn | Germany
Phone +49 5251 688865-27 | support (at)ma-dot2.com | www.malighting.com
Publicidad
Tabla de contenido
